The Question is:
I am trying to install Alpha VMS 6.2-1H3 onto an AlphaServer DS10.
I'm using CD part number AG-QSC4C-RE dated May 1996.
My disk drive is located at Dqa0 and CDROM drive is located at Dqa1.
When I use either Dqa1 or Dqa220.127.116.11.0, I get the same results.
>>> boot dqa1
(boot dqa18.104.22.168.0 -file dqa22.214.171.124.0 -flags 0,0)
block 0 of dqa126.96.36.199 is a valid boot block
reading 1004 blocks from dqa188.8.131.52.0
bootstrap code read in
base=200000, image_start=0, image_bytes=7d800
initializing HWRPB at 2000
initializing page table at 7f8a000
initializing machine state
setting affinity to the primary cpu
jumping to bootstrap code
halt instruction executed
What do I need to do to get VMS 6.2 installed?
Have a great Labor Day
George P. Morris
Desk: (310) 334-4295
Fax: (310) 334-4717
The Answer is :
The OpenVMS FAQ has a pointer to the required minimum version of
OpenVMS for various platforms (in "What version of OpenVMS do I
need?"), and you will find that the AlphaServer DS10 series will
require at least OpenVMS Alpha V7.1-2 (plus ECO kits) and potentially
a later release depending on the specific hardware configuration.