 |
The Question is:
Why won't my Alpha Ds10 (running openvms 7.2-1) recognize a DAT72e drive when
it is connected to the 3x-kzpca-aa controller?
The Answer is :
For general third-party storage peripheral information, please
review the relevent section of the OpenVMS FAQ.
Please contact your hardware services organization or HP Services
for assistance in configuring the SCSI bus and the particular
device; this includes a check of overall bus length, of address
settings in the device and the host controller, proper termination,
and various other hardware considerations. Far more detail is
needed than can be reasonably provided, and the OpenVMS Wizard
is not in a position to provide hardware service or support, nor
device integration and testing, nor hardware troubleshooting.
Do note that the SRM console must first see the device, and then
OpenVMS uses information available from the console. The console
performs basic configuration operations on OpenVMS Alpha.
Again, please contact your prefered hardware support organization.
|
