The Question is:
I am trying to start transport in LASTCP and when I specify:
LASTCP> start /transport/device=fca
the response is:
%LASTCP-E-NODEVFOUND, No Ethernet device found - use LAST$DEVICE
The same command on the other node in the cluster works.
They are VAX4000-90 systems using FDDI network adapters for cluster
Thank you in advance for prompt response,
The Answer is :
You could define and use LAST$DEVICE, assuming the system has an
Ethernet device configured.
Please consider an OpenVMS VAX upgrade from this 1993-vintage
OpenVMS VAX release.
You could also create a BACKUP copy of ESS$LAST_STARTUP.DAT, and
then edit the file to comment out the list of devices (if specified)
and comment out the ALL_CONTROLLERS = ON (as is usually specified),
and then to add the entry:
DEVICE = (FCA)
to the file. Do not specify a colon on the device name. Then
restart with the command:
@SYS$STARTUP:ESS$STARTUP TAPE DISK
This modification will restart LAST/LAD (only) on the FCA controller,
and will disable all other controllers.
You will want to confirm the content of other copies of this file on
the other hosts, and you will also want to determine if the file should
be located in SYS$COMMON: or SYS$SPECIFIC:, with the former location
causing the file to be shared with other members of the cluster using
the particular system disk.