 |
The Question is:
I have a problem with incomming FTP on a 2 node cluster
DIGITAL TCP/IP Services for OpenVMS Alpha Version V5.0A - ECO 2
on a AlphaServer 2100 4/275 running OpenVMS V7.1-1H2
1 node can proces outgoing en incomming ftp connections and the other only
outgoing.
the message is:
%TCPIP-E-FTP_NETERR, I/O error on network device
-SYSTEM-F-REJECT, connect to network object rejected
i can not find any difference in the configuration of the nodes
ftp client and server is enabled on both nodes
all services on de good node
Service Port Proto Process Address State
BIND 53 TCP,UDP TCPIP$BIND 0.0.0.0 Disabled
BPS_GET_GMS 5104 TCP BPS_GET_GMS 0.0.0.0 Enabled
BPS_GET_GMS_DMO 5304 TCP BPS_GET_GMS_DMO 0.0.0.0 Enabled
BPS_GET_LAF 5107 TCP BPS_GET_LAF 0.0.0.0 Enabled
BPS_GET_LAF_DMO 5307 TCP BPS_GET_LAF_DMO 0.0.0.0 Enabled
FINGER 79 TCP TCPIP$FINGER 0.0.0.0 Enabled
FTP 21 TCP TCPIP$FTP 0.0.0.0 Enabled
LBROKER 6570 UDP TCPIP$LBROKER 0.0.0.0 Disabled
LPD 515 TCP TCPIP$LPD 0.0.0.0 Enabled
NTP 123 UDP TCPIP$NTP 0.0.0.0 Enabled
PPS_LES_SRVR 5202 TCP PPS_LES_SRVR 0.0.0.0 Disabled
PPS_SRVR 5201 TCP PPS_SRVR 0.0.0.0 Disabled
RDBSERVER 1 TCP RDB 0.0.0.0 Enabled
RLOGIN 513 TCP not defined 0.0.0.0 Enabled
RSH 514 TCP TCPIP$RSH 0.0.0.0 Enabled
SMTP 25 TCP TCPIP$SMTP 0.0.0.0 Enabled
SNMP 161 UDP UCX$SNMP 0.0.0.0 Disabled
SPAGENT 4999 TCP SWCC_AGENT 0.0.0.0 Enabled
SPGUI 4998 TCP SWCC_GUI 0.0.0.0 Enabled
SPILCOM 6202 TCP UCX_SPILCOM 0.0.0.0 Enabled
TELNET 23 TCP not defined 0.0.0.0 Enabled
TFTP 69 UDP TCPIP$TFTP 0.0.0.0 Disabled
all services on the node with problems
BIND 53 TCP,UDP TCPIP$BIND 0.0.0.0 Disabled
BPS_GET_GMS 5104 TCP BPS_GET_GMS 0.0.0.0 Enabled
BPS_GET_GMS_DMO 5304 TCP BPS_GET_GMS_DMO 0.0.0.0 Enabled
BPS_GET_LAF 5107 TCP BPS_GET_LAF 0.0.0.0 Enabled
BPS_GET_LAF_DMO 5307 TCP BPS_GET_LAF_DMO 0.0.0.0 Enabled
FINGER 79 TCP TCPIP$FINGER 0.0.0.0 Enabled
FTP 21 TCP TCPIP$FTP 0.0.0.0 Enabled
LBROKER 6570 UDP TCPIP$LBROKER 0.0.0.0 Disabled
LPD 515 TCP TCPIP$LPD 0.0.0.0 Disabled
NTP 123 UDP TCPIP$NTP 0.0.0.0 Enabled
PPS_LES_SRVR 5202 TCP PPS_LES_SRVR 0.0.0.0 Disabled
PPS_SRVR 5201 TCP PPS_SRVR 0.0.0.0 Disabled
RDBSERVER 1 TCP RDB 0.0.0.0 Enabled
RLOGIN 513 TCP not defined 0.0.0.0 Enabled
RSH 514 TCP TCPIP$RSH 0.0.0.0 Enabled
SMTP 25 TCP
The Answer is :
The OpenVMS Wizard will assume that you have verified that both
FTP client and FTP server have been configured and started on
both hosts, and that consistent security settings are in use.
If not, please start there.
You will also want to verify the contents of the FTP logs,
enabling these as required -- see the TCP/IP Services manuals
for details on FTP logging.
You will also want to verify the system-wide login and any local
login that the server(s) might encounter.
Please move to a supported configuration -- your OpenVMS Alpha
release is a hardware release, and your TCP/IP Services version
is equivalently old. As of this writing, V7.3-1 and V5.3 (each
eith the appropriate ECO kits) are current.
|
