The Question is:
We have a 'new' TL895 (under contract) and have 4 tape drives in same although
it came with no drives. We moved 4 TZ89 drives from our TL894 initialized,
calibrated, rebooted our MDR, ran sysman io Find_WWid, io auto. VMS sees the
drives and they functio
n but the robot commands only see drive 0 not 0-3. How can we get the robot
commands to work? I've been told maybe we need to set the SCSI ids via the
TL895 console but how?
The Answer is :
Please contact your hardware support organization for assistance with
configuring this or other storage devices.
(The OpenVMS Wizard is unfortunately not a StorageWorks Wizard.)
Typically, the TL895 robot is set to SCSI unit 1, and each DLT tape
drive present is configured to sequential (and contiguous) SCSI units
starting at unit 2.