 |
The Question is:
AlphaServer 4000/533, Uniprocessor, 512MB, KZPAC-CA (2), KZPAA-AA, DE500-BA,
graphics card, OpenVMS V6.2-1H3, SROM V3.0, XSROM V5.7, SRM console 5.7-5,
some TIMA kits installed (LAN05, CPU1603, SCSI08, DRIV18). The system disk is
on a KZPAC (as are all t
he other live, important disks.)
Cannot autoreboot the machine via SYS$SYSTEM:SHUTDOWN autoreboot=yes. Also,
fails to boot if SRM environment variable boot_reset is OFF and an init
command is not issued prior to the reboot.
This is the mess:
[ $sys$system:shutdown with reboot=yes]
%SHUTDOWN-I-REMOVE, all installed images will now be removed
%SHUTDOWN-I-DISMOUNT, all volumes will now be dismounted
%%%%%%%%%%% OPCOM 2-MAY-2000 21:21:14.38 %%%%%%%%%%%
Message from user SYSTEM on PHARM
_PHARM$OPA0:, PHARM shutdown was requested by the operator.
%%%%%%%%%%% OPCOM 2-MAY-2000 21:21:14.39 %%%%%%%%%%%
Logfile was closed by operator _PHARM$OPA0:
Logfile was PHARM::SYS$SYSROOT:[SYSMGR]OPERATOR.LOG;105
%%%%%%%%%%% OPCOM 2-MAY-2000 21:21:14.44 %%%%%%%%%%%
Operator _PHARM$OPA0: has been disabled, username SYSTEM
halted CPU 0
halt code = 5
HALT instruction executed
PC = ffffffff800521dc
CPU 0 booting
(boot dra3.0.0.3.1 -flags 0,0)
Overlay name memadr topadr size ref
rawhide 1a000 71400 357376 0
advshell a4b00 abd00 29184 1
basiccmd 990e0 a4ae0 47616 1
advcmd abd20 bcf20 70144 1
environ 7c660 83e60 30720 1
phase3 948c0 990c0 18432 1
boot 13fc40 14f440 63488 2
eeprom dd560 e2160 19456 100
pci 83e80 90680 51200 1
eisa 906a0 948a0 16896 1
ether e3160 e6f60 15872 1
scsi d3300 d8500 20992 2
fat d8b40 dd540 18944 100
dac960 71420 76020 19456 1
dv d0100 d2b00 10752 1
kbd ee940 f2f40 17920 1
vga bcf40 c1140 16896 1
dump of active call frames:
PC = 0006903C
PD = 0005D5C8
Double Exception from CPU 0
Double Exception from CPU 0
Double Exception from CPU 0
[repeats many, many times before stopping]
Double Exception from CPU 0
Any init prior to booting DRA3 works fine. If the init does not run (like
during a shutdown/reboot), no go.
I've tried booting -fl 0,10000 and there is nothing (i.e. it bombs out before
reading the boot block.)
SRM environment variables are:
P00>>>show
auto_action HALT
boot_dev dra3.0.0.3.1
boot_file
boot_osflags 0,0
boot_reset ON
bootdef_dev dra3.0.0.3.1
booted_dev
booted_file
booted_osflags
cda0 dka400.4.0.1.1
CDA1 dka500.5.0.1.1
CDA2 dka500.5.0.1.1
CDA3 dka500.5.0.1.1
CDA4 dka500.5.0.1.1
char_set 0
com1_baud 9600
com1_flow SOFTWARE
com1_modem OFF
com2_baud 9600
com2_flow SOFTWARE
com2_modem OFF
console serial
cpu_enabled f
d_group field
d_omit
d_passes 1
d_runtime 0
d_verbose 0
dump_dev
enable_audit ON
ewa0_loop_count 3e8
ewa0_loop_inc a
ewa0_loop_patt ffffffff
ewa0_loop_size 2e
ewa0_lp_msg_node 1
ewa0_mode Twisted-Pair
exdep_data 5555555555555555
exdep_location 0
exdep_size 0
exdep_space pmem
exdep_type 3
ffauto OFF
ffnext OFF
fru_table ON
full_powerup_diags ON
graphics_page 0
graphics_type VIDEO
kbd_hardware_type PCXAL
language 36
language_name English (American)
license MU
memory_test full
ocp_text
os_type OpenVMS
pal OpenVMS PALcode V1.21-2, Digital UNIX PALcode V1.23-2
pci_arbmode Round-Robin
pci_parity ON
pci_req64
pka0_disconnect 1
pka0_fast 1
pka0_host_id 7
pkb0_disconnect 1
pkb0_fast 1
pkb0_host_id 7
pkd0_disconnect 1
pkd0_fast 1
pkd0_host_id 7
prompt >>>
rcm_answer ATXA
rcm_dialout
rcm_init AT&FEVS0=0S12=50
reset_boot_arg0 0
reset_boot_arg1
reset_boot_arg2
shutdown_temp 51
srm2dev
sys_model_num 4000
sys_serial_num NI82603E3Q
sys_type PEDESTAL
sys_variant 0
tga_sync_green 0
tt_allow_login 1
tta0_page 0
tta0_type VIDEO
tty_dev 0
version V5.7-5, 18-APR-2000 15:58:16
Changing the auto_action setting to each of the three settings makes no
difference.
Thanks for your assistance.
The Answer is :
This initially appears to be a hardware or console problem, or
(obviously) other situation where a reset is necessary.
Please contact the Compaq Customer Support Center for assistance.
|
