HP OpenVMS Systems Documentation

Content starts here
HP OpenVMS Version 8.3 Upgrade and Installation Manual

Index

}

  Table of Contents

  Glossary

  Index

A

Accounts
creating after installation or upgrade, Creating Accounts (New Installations, Some Upgrades)
ACPI configuration, Checking the ACPI Configuration for Booting OpenVMS in an nPartition
Advanced Encryption Standard (AES), Glossary
Advanced Server for OpenVMS
defined, Glossary
AGEN$INCLUDE files
returning to system disk, AGEN$INCLUDE Files
AGEN$PARAMS.REPORT file
examining, Running AUTOGEN to Tune the System
aliases
with hard links enabled, Installing OpenVMS Using Option 1 of the Operating System Menu
Allocation class (ALLOCLASS parameter)
for shadow sets, Set System Parameters for Volume Shadowing (New Installations Only; Optional)
setting during installation, OpenVMS Cluster Information You Need, Joining an OpenVMS Cluster
supplying during OpenVMS Cluster installation, Prompts for OpenVMS Cluster Configurations
Alpha commands
compared with Integrity server commands, Alpha and Equivalent Integrity Server System Boot Commands
Alpha computers
boot behavior
configuring, Configuring Boot Behavior for Alpha Systems, Setting and Showing Boot Devices
boot device
setting, Setting and Showing Boot Devices
showing, Setting and Showing Boot Devices
boot flag parameters
setting, Setting Boot Flag Parameters
booting
automatic, Setting the System for Automatic Booting
canceling boot device, Setting and Showing Boot Devices
conversational, Performing a Conversational (Interactive) Boot
emergency, Booting in an Emergency
failure, If the System Does Not Boot
from a different root, Booting from a Different Root Directory
manually, Booting Manually from the System Disk
with minimum startup, Booting with Minimum Startup
with PMAD TURBOchannel adapter, Booting over the Network with an Alternate TURBOchannel Adapter
with PMAZB TURBOchannel adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
with PMAZC TURBOchannel adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
with XDELTA, Booting with the XDelta Utility (XDELTA)
firmware, Firmware on Alpha Systems
halting, Halting the System
shutting down, Shutting Down the System
troubleshooting procedures, Detecting and Responding to System Problems
ANALYZE/CRASH command, Emergency Shutdown with Crash Commands
ANALYZE/DISK_STRUCTURE command
error message, Examining the System Disk
using before an upgrade, Examining the System Disk
APB.EXE
and Writeboot utility, Writing a New Boot Block
Architectures
in OpenVMS Cluster, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
Archived files
deleting, Saving Archived Files
saving, Saving Archived Files, Saving Archived Files
Authorization
files, Authorization Files
network proxy, Creating Network Proxy Authorization Files
returning to system disk, Returning Authorization and AGEN$INCLUDE Files to the System Disk
AUTOGEN, Running AUTOGEN to Tune the System
reboot after, Rebooting after AUTOGEN
running after an installation or upgrade, Running AUTOGEN to Tune the System
running at end of installation, Running AUTOGEN
running at end of upgrade, What to Do After Shutdown
tuning operating system, Running AUTOGEN to Tune the System
Availability Manager
configuring, Configuring the Availability Manager Base Software (Optional)
defined, Glossary
installing, Installing OpenVMS Using Option 1 of the Operating System Menu
installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
upgrading, Upgrading Windowing, Networking, and Related Products

B

Backing up the system disk, Backing Up and Restoring the System Disk
after customizing, Backing Up the Customized System Disk and Initiating Systematic Backups
after installation or upgrade, Backing Up Your System Disk
before upgrade, Backing Up the System Disk
from OpenVMS main menu, Using the Operating System Menu
in a shadow set, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
without booting the OpenVMS CD or DVD, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
Backspace key, Using the Delete or Backspace Key with Integrity Server Utilities
BACKUP command, Reasons for Backing Up the System Disk
caution, OpenVMS Cluster Caution
BAP system parameters
tuning, Tuning BAP System Parameters (Alpha Upgrade Only)
Baseboard Management Controller
(see BMC (Baseboard Management Controller))
Batch queue
creating, Setting Up the Queue Manager and Default Queues
BIB (boot-is-blocked state), Booting OpenVMS I64 on an nPartition, Orderly Shutdown, If the System Does Not Boot
defined, Glossary
BMC (Baseboard Management Controller)
defined, Glossary
description, Configuration and Management Utilities for HP Integrity Servers
system event log (SEL), Booting Operations
Boot
defined, Glossary
Boot block, writing, Writing a New Boot Block, Writing a New Boot Block
Boot command
Alpha and Integrity server equivalents, Alpha and Equivalent Integrity Server System Boot Commands
qualifiers for XDELTA, Booting with the XDelta Utility (XDELTA), Booting with the XDelta Utility (XDELTA)
Boot device list, General Notes About Using EFI
Boot device paths
configuring on FC, Configuring and Booting FC Boot Device
Boot flags, Setting and Showing Boot Devices, Adding a Boot Option and Setting Boot Flags
Boot options
boot devices, Setting and Showing Boot Devices, Setting Boot Options for Your System Disk
changing EFI boot timeout, Setting EFI Boot Option Countdown Timer (Timeout)
displaying, Setting the System for Automatic Booting, Displaying EFI Boot Entries and Mapped OpenVMS Devices
during upgrade, Upgrade Creates and Validates Boot Options (I64 Only)
setting, Configuring Boot Behavior for Alpha g Systems, Setting Boot Options for Your System Disk
setting during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
setting during upgrade, Choosing Whether to Allow the Procedure to Create and Validate Boot Options (I64 only)
Boot server
configuration for InfoServer, Setting Up the BOOTP Boot Server (I64 Only)
defined, Glossary
Booting
automatic, Setting the System for Automatic Booting, Setting Boot Options for Your System Disk, Using EFI to Set Automatic Booting of Your System Disk
canceling boot device, Setting and Showing Boot Devices
cell-based servers, Overview of Booting on a Cell-Based Server
conversational, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
emergency, Booting in an Emergency, Emergency Booting
with default system parameters, Booting with Default System Parameters, Booting with Default System Parameters
without startup and login procedures, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
without the user authorization file, Booting Without the User Authorization File, Booting Without a User Authorization File
failure, If the System Does Not Boot, If the System Does Not Boot
Fibre Channel storage devices, Setting Up and Booting Fibre Channel Storage Devices
from a different root, Booting from a Different Root Directory, Booting from a Different Root Directory
from InfoServer, Booting from the InfoServer, Booting from the InfoServer utility, Booting from the InfoServer, Booting from the InfoServer Utility, Booting from the InfoServer, Booting from the InfoServer
from local drive, Booting from the Local Drive, Booting from the Local Drive, Booting from the Local Drive, Booting from the Local Drive
frrom local drive, Booting from the Local  Drive
manually, Booting Manually from the System Disk, Booting Manually from the Local System Disk
OpenVMS Alpha operating system CD, Booting the OpenVMS Alpha Operating System CD
OpenVMS I64 OE DVD, Booting the OpenVMS I64 OE DVD from the Local Drive
operating system kit, Booting the OpenVMS Alpha CD, Booting the OpenVMS I64 OE DVD
for upgrade, Booting the OpenVMS Alpha Operating System CD, Booting the OpenVMS I64 Operating System DVD
problems, Booting with Default System Parameters, Booting with Default System Parameters
satellite, Adding the Network Boot Option to the EFI Boot Manager
setting boot device, Setting and Showing Boot Devices
setting boot flag parameters, Setting Boot Flag Parameters, Adding a Boot Option and Setting Boot Flags
showing boot device, Setting and Showing Boot Devices
with alternate TURBOchannel adapter, Booting over the Network with an Alternate TURBOchannel Adapter
with minimum startup, Booting with Minimum Startup, Booting with Minimum Startup
with PMAD TURBOchannel, Booting over the Network with an Alternate TURBOchannel Adapter
with PMAZB TURBOchannel, Booting with a PMAZB or PMAZC TURBOchannel Adapter
with PMAZC TURBOchannel, Booting with a PMAZB or PMAZC TURBOchannel Adapter
with XDELTA, Booting with the XDelta Utility (XDELTA), Booting with the XDelta Utility (XDELTA)
Bootstrap
defined, Glossary
Bugcheck, Detecting and Responding to System Problems, Detecting and Responding to System Problems

C

CDSA
defined, Glossary
initializing, Initializing CDSA (Optional)
installing, Installing OpenVMS Using Option 1 of the Operating System Menu
installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
new feature, New with OpenVMS Version 8.3
upgrading, Upgrading Windowing, Networking, and Related Products
Cell
defined, Glossary
Cell boot phase, Booting the nPartition Hardware
Cell-based servers
(see also nPartition)
, Configuration and Management Utilities on Cell-Based Servers
(see also nPartition)
booting, Overview of Booting on a Cell-Based Server
defined, Glossary
EFI, General Notes About Using EFI
terminology, Cell-Based Server Terminology
utilities, Configuration and Management Utilities on Cell-Based Servers
Checklist
installation, Installation Tasks
postinstallation and postupgrade, Postinstallation and Postupgrade Tasks
preinstallation for OpenVMS Cluster, Preinstallation Tasks for OpenVMS Cluster Environments
preupgrade, Preupgrade Tasks
preupgrade for OpenVMS Cluster, Preupgrade Tasks for OpenVMS Cluster Environments
upgrade, Upgrade Tasks
CI-only OpenVMS Cluster
defined, Glossary
Cluster
(see OpenVMS Cluster)
Cluster size (disk volume), Changing the Disk Volume Cluster Size
Command procedures
checking after upgrade, Examining Your Command Procedures (Upgrades Only)
site-specific, Examining Your Command Procedures (Upgrades Only)
Computer interconnect (CI)
defined, Glossary
Concurrent upgrades
defined, Glossary
description, Concurrent Upgrade
preparing system for, Preparing Your System for a Concurrent Upgrade
tasks after shutdown, What to Do After Shutdown
Configuration options
during upgrade, Selecting Reinstallation and Reconfiguration Options
Console (Integrity servers)
configuring, Selecting Your OpenVMS Console for the Integrity Server System
delete or backspace key, Using the Delete or Backspace Key with Integrity Server Utilities
interface, Configuration and Management Utilities for HP Integrity Servers
MP, Selecting Your OpenVMS Console for the Integrity Server System
MP interface, Selecting Your OpenVMS Console for the Integrity Server System
options, Overview of Utilities and Console Options
system serial port, Selecting Your OpenVMS Console for the Integrity Server System
Console firmware, Firmware on Alpha Systems, Firmware on Integrity Server Systems
CONTINUE command, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
Core
defined, Glossary
Core I/O
defined, Glossary
Crash commands, Emergency Shutdown with Crash Commands
Customizing the system, Customizing the System (New Installations, Some Upgrades)

D

DCL option (from OpenVMS main menu), Using the Execute DCL Option (8)
Debug devices
configuring, Overview of Using EFI
DEC 3000 Alpha computers
booting
over the network, Booting over the Network with an Alternate TURBOchannel Adapter
with alternate TURBOchannel adapter, Booting over the Network with an Alternate TURBOchannel Adapter
with PMAZB TURBOchannel adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
with PMAZC TURBOchannel adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
DECamds
check for valid versions for system upgrade, Software That Must Be Manually Removed
DECevent
reinstall after upgrade, Reinstall DECevent Software (Upgrades only; optional)
decipher, Glossary
DECnet
declaring during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
node address, OpenVMS Cluster Information You Need
providing during installation, Prompts for OpenVMS Cluster Configurations
node name, OpenVMS Cluster Information You Need
possible values, Prompts for OpenVMS Cluster Configurations
providing during installation, Prompts for OpenVMS Cluster Configurations
DECnet Phase IV
configuring, Configuring DECnet
defined, Glossary
ignoring during startup, Configuring DECnet
installing, Installing OpenVMS Using Option 1 of the Operating System Menu
registering license after installation, Registering Your Licenses
running with DECwindows, Configuring DECnet
upgrading, Upgrading Windowing, Networking, and Related Products
DECnet-Plus
configuring, Configuring DECnet
defined, Glossary9
installing, Installing OpenVMS Using Option 1 of the Operating System Menu
upgrading, Upgrading Windowing, Networking, and Related Products
DECnet/OSI
(see DECnet-Plus)
DECram
checking for valid versions for system upgrade, Software That Must Be Manually Removed
DCL command DECRAM, New with OpenVMS Version 8.3, Warning About Removal of the DECRAM Command, Examining Your Command Procedures (Upgrades Only)
in system upgrade, Remove Older Versions of DECram for OpenVMS (Alpha Only)
DECRYPT command, New with OpenVMS Version 8.3, Warning About Removal of the DECRAM Command, Examining Your Command Procedures (Upgrades Only)
decryption
defined, Glossary
DECwindows Motif
client files, Upgrading Windowing, Networking, and Related Products
defined, Glossary
installing, Installing OpenVMS Using Option 1 of the Operating System Menu
installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
new feature, New with OpenVMS Version 8.3
upgrading, Upgrading Windowing, Networking, and Related Products
Delete key (Integrity server utilities), Using the Delete or Backspace Key with Integrity Server Utilities
Device name
conventions, Device-Naming Conventions
defined, Glossary
Diagnostic partition, Alternative Ways to Initialize the System Disk
defined, Glossary
removing, Removing the Diagnostic Partition File (I64 Only)
Disk server
defined, Glossary
Disk space
amount needed for upgrade, Checking the Size of the System Disk
amount needed to decompress system libraries, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
DSSI-only OpenVMS Cluster
defined, Glossary
Dump file
checking size, System File Sizes'
modifying size, Running AUTOGEN to Tune the System
Dump Off the System Disk (DOSD)
configuring, Overview of Using EFI
DWMOTIF_SUPPORT, New with OpenVMS Version 8.3, Upgrading Windowing, Networking, and Related Products

E

EFI (Extensible Firmware Interface), Integrity Server Tools
adding boot options, Setting Boot Options for Your System Disk
boot path settings
storing and restoring, Saving and Restoring EFI Settings
changing boot option timeout, Setting EFI Boot Option Countdown Timer (Timeout)
defined, Glossary
description, Configuration and Management Utilities for HP Integrity Servers
displaying boot options, Displaying EFI Boot Entries and Mapped OpenVMS Devices
on nPartition, General Notes About Using EFI
using, Overview of Using EFI
EFI Boot Manager, Overview of Utilities and Console Options
(see also OpenVMS I64 Boot Manager (BOOT_OPTIONS.COM) utility)
, Overview of Utilities and Console Options
(see also OpenVMS I64 Boot Manager (BOOT_OPTIONS.COM) utility)
adding boot options to
manually, Using EFI to Set Automatic Booting of Your System Disk
using OpenVMS I64 Boot Manager utility, Setting Boot Options for Your System Disk
setting boot behavior, Configuring and Managing OpenVMS Booting on Integrity Servers
setting timeout, Setting EFI Boot Option Countdown Timer (Timeout)
EFI Utilities for OpenVMS (I64)
documentation, Displaying EFI Boot Entries and Mapped OpenVMS Devices
entering commands, Differences Between OpenVMS I64 and Alpha Installations, General Notes About Using EFI
vms_bcfg, Using EFI to Set Automatic Booting of Your System Disk
vms_set command, Alpha and Equivalent Integrity Server System Boot Commands
vms_show command, Displaying EFI Boot Entries and Mapped OpenVMS Devices, Alpha and Equivalent Integrity Server System Boot Commands
EFI$BCFG
(see OpenVMS I64 Boot Manager (BOOT_OPTIONS.COM) utility)
Emergency system startup, Booting in an Emergency, Emergency Booting
with default system parameters, Booting with Default System Parameters, Booting with Default System Parameters
without startup and login procedures, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
without the UAF, Booting Without the User Authorization File, Booting Without a User Authorization File
encipher, Glossary
ENCRYPT command, New with OpenVMS Version 8.3, Warning About Removal of the DECRAM Command, Examining Your Command Procedures (Upgrades Only)
encryption
defined, Glossary
Encryption for OpenVMS, Glossary
Enterprise Operating Environment (EOE)
defined, Glossary
licensing, Installing OpenVMS Using Option 1 of the Operating System Menu
options, Installing OpenVMS Using Option 1 of the Operating System Menu, Components You Choose Not to Install
EOE
(see Enterprise Operating Environment (EOE))
Errors
cluster hang during preupgrade shutdown, Preparing Your System for a Rolling Upgrade
running ANALYZE/DISK_STRUCTURE, Examining the System Disk
troubleshooting system problems, If the System Does Not Boot, If the System Does Not Boot
Extensible Firmware Interface
(see EFI (Extensible Firmware Interface))

F

FEEDBACK.DAT file, Ensuring You Have a Recent FEEDBACK.DAT File
Fibre Channel
configuring and booting, Setting Up and Booting Fibre Channel Storage Devices
configuring for booting, Overview of Using EFI, Setting Boot Options for Your System Disk, Setting Up FC Disks for Booting and Dumping, Configuring and Booting FC Boot Device
in cluster, Configuring Additional Nodes to Boot into a Cluster Using a Shared Disk
configuring for dumping, Setting Up FC Disks for Booting and Dumping, Configuring and Booting FC Boot Device
displaying device information, Viewing the FC Configuration from the Console, Setting Up FC Disks for Booting and Dumping, Checking the Firmware Version
firmware, Viewing the FC Configuration from the Console, Checking the Firmware Version, Obtaining the IPF Offline Diagnostics and Utilities
newly installed disk, Installing OpenVMS Using Option 1 of the Operating System Menu
newly upgraded system disk, Choosing Whether to Allow the Procedure to Create and Validate Boot Options (I64 only)
SAN storage array graphic, Fibre Channel Host and SAN Storage Controller Configuration
system disk booting, Setting Up FC Disks for Booting and Dumping, Configuring and Booting FC Boot Device
system disk identification, Installing OpenVMS Using Option 1 of the Operating System Menu
FIELD account
creating after installation or upgrade, Creating Accounts (New Installations, Some Upgrades)
Files
restoring on the system disk, Using the Operating System Menu
Firmware
revision checking, Firmware on Alpha Systems, Firmware on Integrity Server Systems, Checking Firmware Version
updating, Firmware on Alpha Systems, Firmware on Integrity Server Systems
FOE
(see Foundation Operating Environment (FOE))
Foundation Operating Environment (FOE)
defined, Glossary
licensing, Installing OpenVMS Using Option 1 of the Operating System Menu
options, Installing OpenVMS Using Option 1 of the Operating System Menu, Components You Choose Not to Install

I

iLO (Integrated Lights-Out), Integrity Server Tools, Configuration and Management Utilities for HP Integrity Servers
InfoServer
booting, Booting from the InfoServer, Booting from the InfoServer, Booting from the InfoServer, Booting from the InfoServer
client configuration, Setting Up Your System as an InfoServer Client (I64 Only)
defined, Key Terms, Glossary
LAN devices supported, Booting from the InfoServer, Determining the Local Network I/O Card to Be Used
losing connection, Booting from the InfoServer, Booting from the InfoServer
during installation, Booting from the InfoServer
during upgrade, Booting from the InfoServer
software application
boot server configuration, Setting Up the BOOTP Boot Server (I64 Only)
booting OpenVMS, Booting from the InfoServer
configuration, Setting Up and Performing Network Booting
server configuration, Setting Up the InfoServer Server
troubleshooting, Troubleshooting InfoServer Boot Problems
INITIALIZE
command, Setting the System for Automatic Booting
option
alternative use of, Alternative Ways to Initialize the System Disk
on OpenVMS main menu, INITIALIZE Option, Installing OpenVMS Using Option 1 of the Operating System Menu
Installable products
displaying, Using the Display Layered Products Option (2)
Installation
(see also Preinstallation tasks, Postinstallation tasks)
, After Installing or Upgrading the OpenVMS Operating System
(see also Preinstallation tasks, Postinstallation tasks)
and AUTOGEN, Running AUTOGEN
booting
new system disk, Installing OpenVMS Using Option 1 of the Operating System Menu, Booting the New OpenVMS System Disk
operating system kit, Booting the OpenVMS Operating System Media
checklist, Installation Tasks
completing the procedure, Installing OpenVMS Using Option 1 of the Operating System Menu
component options, list of, Installing OpenVMS Using Option 1 of the Operating System Menu
differences between OpenVMS Alpha and I64, Differences Between OpenVMS I64 and Alpha Installations
help text, Installing OpenVMS Using Option 1 of the Operating System Menu
information needed for OpenVMS Cluster, Preparing to Install in an OpenVMS Cluster Environment
layered products, Installing OpenVMS Using Option 1 of the Operating System Menu
after installation or upgrade, Installing and Configuring Layered Products (New Installations, Some Upgrades)
license registration, Installing OpenVMS Using Option 1 of the Operating System Menu
on target disk, Installing OpenVMS Using Option 1 of the Operating System Menu
OpenVMS Debugger clients, Installing OpenVMS Debugger Clients on a PC (Optional)
PCSI, Using the Operating System Menu
procedure, Installing OpenVMS Using Option 1 of the Operating System Menu
prompts, Responding to Prompts During the Installation
rebooting system, Rebooting after AUTOGEN
recording, Hardware Components
selecting component options, Installing OpenVMS Using Option 1 of the Operating System Menu
setting passwords, Installing OpenVMS Using Option 1 of the Operating System Menu
specifying OpenVMS Cluster configuration, Joining an OpenVMS Cluster
stages of, Installation Tasks
system information, providing, Installing OpenVMS Using Option 1 of the Operating System Menu
third-party networking software, Installing and Configuring Third-Party Networking Software
windowing and networking products, Installing OpenVMS Using Option 1 of the Operating System Menu
Installed products
displaying, Using the Show Installed Products Option (4)
removing, Using the Remove Installed Products Option (6)
Instant Capacity (iCAP)
and removal of the operating system from system disk, Removing the OpenVMS Operating System
and system disk initialization, INITIALIZE Option
configuring, Configure the Instant Capacity Software (Optional; I64 only)
defined, Glossary
requirements, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1), Installing OpenVMS Using Option 1 of the Operating System Menu, Upgrading Windowing, Networking, and Related Products
Integrated Lights-Out
(see iLO (Integrated Lights-Out))
Integrity servers
boot behavior
configuring, Configuring and Managing OpenVMS Booting on Integrity Servers
boot device
setting, Configuring and Managing OpenVMS Booting on Integrity Servers, Setting Boot Options for Your System Disk
showing, Configuring and Managing OpenVMS Booting on Integrity Servers, Setting Boot Options for Your System Disk
boot flag parameters
setting, Adding a Boot Option and Setting Boot Flags
boot options, Installing OpenVMS Using Option 1 of the Operating System Menu
during upgrade, Choosing Whether to Allow the Procedure to Create and Validate Boot Options (I64 only), Upgrade Creates and Validates Boot Options (I64 Only)
EFI boot menu, Overview of Using EFI
managing, Configuring and Managing OpenVMS Booting on Integrity Servers
OpenVMS I64 installation, Installing OpenVMS Using Option 1 of the Operating System Menu
booting
automatic, Setting Boot Options for Your System Disk, Using EFI to Set Automatic Booting of Your System Disk
conversational, Performing a Conversational (Interactive) Boot
emergency, Emergency Booting
failure, If the System Does Not Boot
from a different root, Booting from a Different Root Directory
manually, Booting Manually from the Local System Disk
with minimum startup, Booting with Minimum Startup
with XDELTA, Booting with the XDelta Utility (XDELTA)
commands
and equivalent Alpha commands, Alpha and Equivalent Integrity Server System Boot Commands
console configuration, Selecting Your OpenVMS Console for the Integrity Server System
documentation, Getting to Know Your Integrity Server, Configuring OpenVMS I64 Hardware Operation and Boot Operations, and Booting and Shutting Down Your System
firmware, Firmware on Integrity Server Systems
getting started, Getting Started: Main Steps After You Unpack Your Integrity Server
halting, Halting the Integrity Server to Recover from Hangs and Crashes
hangs or crashes, Halt and Shutdown Procedures
OE DVD, OpenVMS for Integrity Servers Operating Environment (OE) DVD
booting, Booting the OpenVMS I64 OE DVD from the Local Drive
overview, Getting to Know Your Integrity Server
setting up and booting, Getting Started: Main Steps After You Unpack Your Integrity Server, Configuring ]OpenVMS I64 Hardware Operation and Boot Operations, and Booting and Shutting Down Your System
shutting down, Shutting Down the System
system event log (SEL), Booting Operations
troubleshooting procedures, Detecting and Responding to System Problems
utilities and console options, Configuration and Management Utilities for HP Integrity Servers
Internationalization (VMSI18N) data kit
installation, Installing the OpenVMS Internationalization Data Kit
Interrupt Priority C (IPC), Preparing Your System for a Rolling Upgrade
IPF Offline Diagnostics and Utilities CD, Obtaining the IPF Offline Diagnostics and Utilities

L

LAN devices
InfoServer support, Booting from the InfoServer, Determining the Local Network I/O Card to Be Used
Layered products
defined, Glossary
installing
after OpenVMS installation or upgrade, Installing and Configuring Layered Products (New Installations, Some Upgrades)
alternative procedure, Alternative Procedure
during OpenVMS installation, Installing OpenVMS Using Option 1 of the Operating System Menu
during OpenVMS upgrade, Shutting Down the System
installing or upgrading independently of system, Using the Install or Upgrade Layered Products Option (3), Installing and Configuring Layered Products (New Installations, Some Upgrades)
reconfiguring, Using the Reconfigure Installed Products Option (5)
registering, Using the Install or Upgrade Layered Products Option (3)
Secure Delivery, New with OpenVMS Version 8.3, Using the Install or Upgrade Layered Products Option (3), Differences Between OpenVMS I64 and Alpha Installations, Installing OpenVMS Using Option 1 of the Operating System Menu, Secure Delivery Validation, Installing and Configuring Layered Products (New Installations, Some Upgrades)
system upgrade effect on, Licenses and Layered Products
LIBDECOMP.COM, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
Libraries
compressing and decompressing, Running AUTOGEN
expanding, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
License Management utility
using, Registering Your Licenses
Licenses, Installing OpenVMS Using Option 1 of the Operating System Menu
registering
after installation or upgrade, Registering Your Licenses
update requirements for system upgrade, Update License Requirements
upgrade effect on layered products, Licenses and Layered Products
Local area OpenVMS Cluster
defined, Glossary
Local drive
defined, Key Terms, Glossary
Log
for installation, Hardware Components
Logging in
problems due to forgotten password, Booting Without the User Authorization File, Booting Without a User Authorization File
problems due to login procedure, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
problems due to startup procedure, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
logical CPU
defined, Glossary
Logical names
UAFALTERNATE, Booting Without the User Authorization File, Booting Without a User Authorization File
Login command procedures
booting without, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
errors preventing login, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
Login welcome message
defining, Creating a System-Specific Login Welcome Message (Optional)

M

Magnetic media
defined, Key Terms
Maintenance Operations Protocol (MOP)
defined, Glossary
Management Processor (MP)
co command, Selecting Your OpenVMS Console for the Integrity Server System
defined, Glossary
description, Configuration and Management Utilities for HP Integrity Servers
setting as console interface, Selecting Your OpenVMS Console for the Integrity Server System
MCOE
(see Mission Critical Operating Environment (EOE))
Media
defined, Glossary
Migration support, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
defined, Glossary
Minimum startup, Booting with Minimum Startup, Booting with Minimum Startup
Mission Critical Operating Environment (MCOE)
defined, Glossary
licensing, Installing OpenVMS Using Option 1 of the Operating System Menu
options, Installing OpenVMS Using Option 1 of the Operating System Menu, Components You Choose Not to Install
Mixed-architecture OpenVMS Cluster systems, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment, Notes and Restrictions
OpenVMS Management Station, Setting Up in a Mixed-Architecture Cluster Environment
Mixed-version OpenVMS Cluster systems, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment, Preparing Your System for a Rolling Upgrade
MODPARAMS.DAT parameter file
modifying after installation or upgrade, Modifying System Parameters
modifying after upgrade, Modifying System Parameters After an Upgrade
modifying before upgrade, Verifying System Parameters
modifying for cluster, OpenVMS Cluster Parameters
MOP server
defined, Glossary
MP
(see Management Processor (MP))
Multihead system
configuring, Configuring a Multihead System (Optional)

O

ODS-2
selecting on installation, Installing OpenVMS Using Option 1 of the Operating System Menu
selecting on upgrade, Specifying the On-Disk Structure Level
ODS-5
selecting on installation, Installing OpenVMS Using Option 1 of the Operating System Menu
selecting on upgrade, Specifying the On-Disk Structure Level
OE
(see Operating Environment (OE))
On-Disk Structure Level
specifying, Installing OpenVMS Using Option 1 of the Operating System Menu
OPCCRASH.EXE, Emergency Shutdown with OPCCRASH.EXE, Emergency Shutdown with OPCCRASH.EXE
OpenVMS Alpha
boot behavior
configuring, Setting and Showing Boot Devices
boot flags, Setting Boot Flag Parameters
booting
automatic, Setting the System for Automatic Booting
conversational, Performing a Conversational (Interactive) Boot
from a different root, Booting from a Different Root Directory
manually, Booting Manually from the System Disk
with minimum startup, Booting with Minimum Startup
with XDELTA, Booting with the XDelta Utility (XDELTA)
component options, Installing OpenVMS Using Option 1 of the Operating System Menu
firmware, Firmware on Alpha Systems
layered products
installing, Alternative Procedure
operating system CD, OpenVMS Alpha Operating System CD
booting, Booting the OpenVMS Alpha Operating System CD
shutting down, Shutting Down the System
OpenVMS Cluster
and OpenVMS Management Station, Setting Up in a Mixed-Architecture Cluster Environment
BACKUP caution, OpenVMS Cluster Caution
becoming a member
during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
during upgrade, Setting OpenVMS Cluster Membership Information
preupgrade requirements, Adding a New System to an OpenVMS Cluster
configuring
after installation, Installing OpenVMS Using Option 1 of the Operating System Menu, Joining an OpenVMS Cluster
during installation, Joining an OpenVMS Cluster
defined, Glossary
EXPECTED_VOTES parameter, OpenVMS Cluster Parameters
group number
rules for creating, Preparing to Install in an OpenVMS Cluster Environment
information required for OpenVMS installation, Preparing to Install in an OpenVMS Cluster Environment
installation
prompts, Joining an OpenVMS Cluster
supplying ALLOCLASS parameter, Prompts for OpenVMS Cluster Configurations
installing, Joining an OpenVMS Cluster
installing TDC_RT, Installation in OpenVMS Clusters
label for system disk, Suggested Procedures
local area, Glossary
migration support, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
defined, Glossary
mixed-version support, Mixed-Version Support in an OpenVMS Cluster Environment
parameters
after upgrade, OpenVMS Cluster Parameters
password
rules for creating, Preparing to Install in an OpenVMS Cluster Environment
quorum
adjusting using Availability Manager or DECamds, Preparing Your System for a Rolling Upgrade
adjusting using IPC, Preparing Your System for a Rolling Upgrade
maintaining during rolling upgrades, Preparing Your System for a Rolling Upgrade
rebooting members, Rebooting Cluster Members (Upgrades Only)
upgrade
concurrent, Concurrent Upgrade
preparing for, Preparing to Upgrade in an OpenVMS Cluster Environment, Preparing Your System for a Concurrent Upgrade, Preparing Your System for a Rolling Upgrade
rolling, Rolling Upgrade, Notes and Restrictions
setting membership information, Setting OpenVMS Cluster Membership Information
tasks after shutdown, What to Do After Shutdown
types of, Types of Upgrades
warranted support, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
defined, Glossary
OpenVMS Debugger
installing clients on a PC, Installing OpenVMS Debugger Clients on a PC (Optional)
OpenVMS Galaxy
creating an instance, Installing OpenVMS Using Option 1 of the Operating System Menu, Setting OpenVMS Galaxy Information (Alpha Only)
OpenVMS I64
boot behavior
configuring, Setting Boot Options for Your System Disk
boot flags, Adding a Boot Option and Setting Boot Flags
booting
automatic, Setting Boot Options for Your System Disk, Using EFI to Set Automatic Booting of Your System Disk
conversational, Performing a Conversational (Interactive) Boot
from a different root, Booting from a Different Root Directory
manually, Booting Manually from the Local System Disk
with minimum startup, Booting with Minimum Startup
with XDELTA, Booting with the XDelta Utility (XDELTA)
component options, Installing OpenVMS Using Option 1 of the Operating System Menu
firmware, Firmware on Integrity Server Systems
layered products
installing, Alternative Procedure
OE DVD, OpenVMS for Integrity Servers Operating Environment (OE) DVD
booting, Booting the OpenVMS I64 OE DVD from the Local Drive
shutting down, Shutting Down the System
OpenVMS I64 Boot Manager (BOOT_OPTIONS.COM) utility, Configuring and Managing OpenVMS Booting on Integrity Servers
(see also EFI Boot Manager)
, Overview of Utilities and Console Options, Configuring and Managing OpenVMS Booting on Integrity Servers
(see also EFI Boot Manager)
adding boot entry for system disk, Installing OpenVMS Using Option 1 of the Operating System Menu, Choosing Whether to Allow the Procedure to Create and Validate Boot Options (I64 only), Setting Boot Options for Your System Disk
changing EFI boot timeout value, Setting EFI Boot Option Countdown Timer (Timeout)
displaying boot options, Displaying EFI Boot Entries and Mapped OpenVMS Devices
overview, Overview of Using EFI
OpenVMS instance
defined, Glossary
OpenVMS internationalization (VMSI18N) data kit
installation, Installing the OpenVMS Internationalization Data Kit
OpenVMS Management Station

defined, Glossary
defining TCP/IP nodes, Defining TCP/IP Nodes
disk quotas, Enabling Disk Quotas
error log, Error Log Information
getting started, Getting Started with OpenVMS Management Station
preparing the PC, Preparing Your PC
preparing to use, Preparing to Use OpenVMS Management Station
problem reporting, Determining and Reporting Problems
removing, Removing OpenVMS Management Station
server
removing, Removing the OpenVMS Management Station Server
system files, Editing the System Files
uninstalling V2.1 client, Removing Version 2.1 of the OpenVMS Management Station Client
Operating Environment (OE)
DVD
defined, Glossary
for OpenVMS
defined, Glossary
licensing, Installing OpenVMS Using Option 1 of the Operating System Menu
options, Installing OpenVMS Using Option 1 of the Operating System Menu, Components You Choose Not to Install
Operating system
CD
defined, Glossary
files
removing, Removing the OpenVMS Operating System
media
defined, Key Terms, Glossary
Operating system kit
booting for installation, Booting the OpenVMS Operating System Media, Booting the OpenVMS Alpha CD, Booting the OpenVMS I64 OE DVD
booting for upgrade, Booting the Operating System Media, Booting the OpenVMS Alpha Operating System CD, Booting the OpenVMS I64 Operating System DVD
Output
saving from installation, Hardware Components

P

Page file
checking size, System File Sizes
modifying size, Running AUTOGEN to Tune the System
PAK
(see Product Authorization Key (PAK))
Partition
defined, Glossary
Partition Manager, Cell-Based Server Terminology, Configuration and Management Utilities on Cell-Based Servers
Password
forgotten, Logging In from a Character-Cell Terminal, Booting Without the User Authorization File, Booting Without a User Authorization File
minimum length, Installing OpenVMS Using Option 1 of the Operating System Menu
setting during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
Patches
finding, installing, removing
using distribution media menu option, Using the Patches and Recovery Data Option (7)
installing from download, Installing Patches (Optional but Recommended)
required for existing OpenVMS Cluster members, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
Secure Delivery, Installing Patches (Optional but Recommended)
PATHWORKS for OpenVMS (Advanced Server)
defined, Glossary
Pay per use (PPU)
0
configuring, Configure the Pay per use Software (Optional; I64 only)
defined, Glossary
requirements, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1), Installing OpenVMS Using Option 1 of the Operating System Menu, Upgrading Windowing, Networking, and Related Products
PCSI
and recovery data, Checking for Recovery Data
installing layered products independently, Alternative Procedure
installing patches
using FTP, Installing Patches (Optional but Recommended)
installing the operating system, Using the Operating System Menu
upgrading the operating system, Using the Operating System Menu
Performance Data Collector (TDC)
defined, Glossary
Performance Data Collector base software (TDC_RT)
compatibility with prior releases, Compatibility with Prior Releases
defined, Glossary
initializing and running, Initializing and Running the Performance Data Collector Base Software (Optional)
installing, Installing OpenVMS Using Option 1 of the Operating System Menu
in OpenVMS Clusters, Installation in OpenVMS Clusters
installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
running the software, Running TDC_RT
startup file, Startup File
upgrading, Upgrading Windowing, Networking, and Related Products
user privileges and quotas, User Privileges and Quotas
Platform
defined, Glossary
PMAD TURBOchannel adapter
booting system, Booting over the Network with an Alternate TURBOchannel Adapter
PMAZB TURBOchannel adapter
booting system, Booting with a PMAZB or PMAZC TURBOchannel Adapter
PMAZC TURBOchannel adapter
booting system, Booting with a PMAZB or PMAZC TURBOchannel Adapter
POLYCENTER Software Installation utility
(see PCSI)
POSSE (Pre-OS System Environment)
defined, Glossary
HP implementation of EFI, Overview of Utilities and Console Options
Postinstallation tasks
accounts, Creating Accounts (New Installations, Some Upgrades)
AUTOGEN
to set system parameter changes, Running AUTOGEN to Set System Parameter Changes
tuning the system, Running AUTOGEN to Tune the System
Availability Manager configuration, Configuring the Availability Manager Base Software (Optional)
backing up the system disk, Backing Up Your System Disk, Backing Up the Customized System Disk and Initiating Systematic Backups
BAP system parameters, Tuning BAP System Parameters (Alpha Upgrade Only)
CDSA initialization, Initializing CDSA (Optional)
checklist, Postinstallation and Postupgrade Tasks
customizing the system, Customizing the System (New Installations, Some Upgrades)
DECnet configuration, Configuring DECnet
iCAP configuration, Configure the Instant Capacity Software (Optional; I64 only)
Kerberos configuration, Configuring Kerberos (Optional)
layered products, Installing and Configuring >Layered Products (New Installations, Some Upgrades)
license registration, Registering Your Licenses
login welcome message, Creating a System-Specific Login Welcome Message (Optional)
MODPARAMS.DAT file, Modifying System Parameters
multihead system configuration, Configuring a Multihead System (Optional)
network proxy authorization files, Creating Network Proxy Authorization Files
OpenVMS Debugger clients installation, Installing OpenVMS Debugger Clients on a PC (Optional)
OpenVMS Management Station, Preparing to Use OpenVMS Management Station (Optional)
patches, Installing Patches (Optional but Recommended)
PPU configuration, Configure the Pay per use Software (Optional; I64 only)
print queues, Creating Print Queues (New Installations, Some Upgrades)
queue manager and default queues, Setting Up the Queue Manager and Default Queues
shadow sets
system parameters, Set System Parameters for Volume Shadowing (New Installations Only; Optional)
shadow sets, forming, Forming the Shadow Set
SSL configuration, Configuring SSL for OpenVMS
SYSTARTUP_VMS.COM procedure, Configuring DECnet, Updating SYSTARTUP_VMS.COM to Start Layered Products and Print Queues
system files, Adding and Removing Operating System Files (Optional)
system libraries, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
TCP/IP Services for OpenVMS configuration, Configuring HP TCP/IP Services for OpenVMS
TDC_RT initialization, Initializing and Running the Performance Data Collector Base Software (Optional)
testing the system, Testing the System with UETP (Optional)
third-party networking software configuration, Installing and Configuring Third-Party Networking Software
tuning the system, Running AUTOGEN to Tune the System
Postupgrade tasks
accounts, Creating Accounts (New Installations, Some Upgrades)
AUTOGEN
to set system parameter changes, Running AUTOGEN to Set System Parameter Changes
turning the system, Running AUTOGEN to Tune the System
Availability Manager configuration, Configuring the Availability Manager Base Software (Optional)
backing up the system disk, Backing Up Your System Disk, Backing Up the Customized System Disk and Initiating Systematic Backups
BAP system parameters, Tuning BAP System Parameters (Alpha Upgrade Only)
CDSA initialization, Initializing CDSA (Optional)
cluster members, Rebooting Cluster Members (Upgrades Only)
command procedure templates, Examining Your Command Procedures (Upgrades Only)
customizing the system, Customizing the System (New Installations, Some Upgrades)
DECnet configuration, Configuring DECnet
dump file size, Running AUTOGEN to Tune the System
iCAP configuration, Configure the Instant Capacity Software (Optional; I64 only)
Kerberos configuration, Configuring Kerberos (Optional)
layered products, Installing and Configuring Layered Products (New Installations, Some Upgrades)
license registration, Registering Your Licenses
login welcome message, Creating a System-Specific Login Welcome Message (Optional)
MODPARAMS.DAT file, Modifying System Parameters, Modifying System Parameters After an Upgrade
multihead system configuration, Configuring a Multihead System (Optional)
network proxy authorization files, Creating Network Proxy Authorization Files
OpenVMS Debugger clients installation, Installing OpenVMS Debugger Clients on a PC (Optional)
OpenVMS Management Station, Preparing to Use OpenVMS Management Station (Optional)
page file size, Running AUTOGEN to Tune the System
patches, Installing Patches (Optional but Recommended)
PPU configuration, Configure the Pay per use Software (Optional; I64 only)
print queues, Creating Print Queues (New Installations, Some Upgrades)
queue manager and default queues, Setting Up the Queue Manager and Default Queues
shadow sets
license required, Registering Your Licenses
shadow sets reformation, Reforming the Shadow Set as Final Postupgrade Backup
shadow sets, forming, Forming the Shadow Set
SSL configuration, Configuring SSL for OpenVMS
swap file size, Running AUTOGEN to Tune the System
SYSTARTUP_VMS.COM procedure, Configuring DECnet, Updating SYSTARTUP_VMS.COM to Start Layered Products and Print Queues
system files
adding or removing, Adding and Removing Operating System Files (Optional)
sizes, System File Sizes
system libraries, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
TCP/IP Services for OpenVMS configuration, Configuring HP TCP/IP Services for OpenVMS
TDC_RT initialization, Initializing and Running the Performance Data Collector Base Software (Optional)
testing the system, Testing the System with UETP (Optional)
third-party networking software configuration, Installing and Configuring Third-Party Networking Software
tuning the operating system, Running AUTOGEN to Tune the System
Pre-OS System Environment
(see POSSE (Pre-OS System Environment))
Preinstallation tasks
collecting information for, Responding to Prompts During the Installation
firmware revision checking, Firmware on uAlpha Systems, Checking Firmware Version
OpenVMS Cluster environment, Preparing to Install in an OpenVMS Cluster Environment
software and hardware components, Examining Software and Hardware Components
PRESERVE option, PRESERVE Option
Preupgrade tasks
backing up system disk, Backing Up the System Disk
checklist, Preupgrade Tasks, Postinstallation and Postupgrade Tasks
OpenVMS Cluster, Preupgrade Tasks for OpenVMS Cluster Environments
DECamds and DECram, Software That Must Be Manually Removed
FEEDBACK.DAT file, Ensuring You Have a Recent FEEDBACK.DAT File
shutting down system, Finishing Preupgrade Tasks
system disk, Preparing the System Disk, Examining the System Disk
volume shadowing, Shadowing Environment
Print queue
creating after installation or upgrade, Creating Print Queues (New Installations, Some Upgrades)
default
creating, Setting Up the Queue Manager and Default Queues
Printer
recording installation on, Hardware Components
Problems
booting, Booting with Default System Parameters, Booting with Default System Parameters
troubleshooting, If the System Does Not Boot, If the System Does Not Boot
locked out of system, Booting Without the User Authorization File, Booting Without a User Authorization File
logging in, Booting Without Startup and Login Procedures, Booting Without the User Authorization File, Booting Without Startup and Login Procedures, Booting Without a User Authorization File
Product Authorization Key (PAK)
registering after an installation or upgrade, Registering Your Licenses
PRODUCT INSTALL command, Installing and Configuring Layered Products (New Installations, Some Upgrades)
PRODUCT REMOVE command
files not removed with, Removing the OpenVMS Operating System
removing operating system files, Removing the OpenVMS Operating System
Proxy files
(see Network proxy authorization files)

R

Reboot
(see also Boot, Booting)
, Rebooting after AUTOGEN
(see also Boot, Booting)
after AUTOGEN, Rebooting after AUTOGEN
after installation, Rebooting after AUTOGEN
automatic after AUTOGEN, Rebooting after AUTOGEN
example, Booting with Default System Parameters, Booting with Default System Parameters
OpenVMS Cluster members, Rebooting Cluster Members (Upgrades Only)
Recovery data
checking for during upgrade, Checking for Recovery Data
displaying and installing
using distribution media menu option, Using the Patches and Recovery Data Option (7)
Release notes
after installation or upgrade, Customizing the System (New Installations, Some Upgrades)
before installation, Software Components
Remedial kits
deleting archived files, Saving Archived Files
required for existing OpenVMS Cluster members, Mixed-Version Support in OpenVMS Cluster Systems, Mixed-Version Support in an OpenVMS Cluster Environment
saving archived files, Saving Archived Files, Saving Archived Files
Removing operating system files, Removing the OpenVMS Operating System
Restoring system disk, Restoring the System Disk
without booting the OpenVMS CD or DVD, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
Restrictions
for OpenVMS upgrade, Notes, Cautions, and Restrictions
Rolling upgrades
caution, Preparing Your System for a Rolling Upgrade
defined, Glossary
description, Rolling Upgrade
maintaining cluster quorum, Preparing Your System for a Rolling Upgrade
operating system version required, Notes and Restrictions
preparing system for, Preparing Your System for a Rolling Upgrade
restrictions, Notes and Restrictions
tasks after shutdown, What to Do After Shutdown

S

SAN disk, Configuring Additional Nodes to Boot into a Cluster Using a Shared Disk
SAN storage device
delay in EFI initialization, Booting from the Local Drive, Booting from the Local Drive, Booting the OpenVMS I64 OE DVD from the Local Drive, Configuring and Booting FC Boot Device
graphic, Fibre Channel Host and SAN Storage Controller Configuration
Satellite booting, Adding the Network Boot Option to the EFI Boot Manager
Satellite node
defined, Glossary
Save sets
transferring to system disk, Installing OpenVMS Using Option 1 of the Operating System Menu
Scratch disk
defined, Glossary
SCSSYSTEMID system parameter
specifying, Installing OpenVMS Using Option 1 of the Operating System Menu
SDA (System Dump Analyzer), Emergency Shutdown with Crash Commands
Secure Delivery
and distribution kits, New with OpenVMS Version 8.3, Using the Install or Upgrade Layered Products Option (3), Differences Between OpenVMS I64 and Alpha Installations, Installing OpenVMS Using Option 1 of the Operating System Menu, Secure Delivery Validation, Installing and Configuring Layered Products (New Installations, Some Upgrades)
and installing patches, Installing Patches (Optional but Recommended)
defined, Glossary
new feature, New with OpenVMS Version 8.3
Selecting active console devices, Selecting Your OpenVMS Console for the Integrity Server System
Server complex
defined, Glossary
SET AUTO_ACTION command, Setting the System for Automatic Booting
SET BOOT command, Writing a New Boot Block
SET BOOT_OSFLAGS command, Setting Boot Flag Parameters
SET BOOTDEF_DEV command, Setting and Showing Boot Devices
SETBOOTBLOCK command, Writing a New Boot Block
Shadow sets
L
(see also Volume shadowing)
, Shadowing Environment
(see also Volume shadowing)
adding to boot and dump device lists, Installing OpenVMS Using Option 1 of the Operating System Menu, Choosing Whether to Allow the Procedure to Create and Validate Boot Options (I64 only)
backing up system disk, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
forming, Forming the Shadow Set
license required, Registering Your Licenses
system parameters, Set System Parameters for Volume Shadowing (New Installations Only; Optional)
reforming, Reforming the Shadow Set as Final Postupgrade Backup
system disk
upgrading, Shadowing Environment
SHOW BOOTDEF_DEV command, Setting and Showing Boot Devices
SHOW CRASH command, Emergency Shutdown with Crash Commands
Shutdown
after installation, Rebooting after AUTOGEN
before an upgrade, Finishing Preupgrade Tasks, Preparing Your System for a Concurrent Upgrade, Preparing Your System for a Rolling Upgrade
procedures, Shutting Down the System, Shutting Down the System
Shutdown option, Using the Shut Down Option (9)
SHUTDOWN.COM, Shutting Down the System, Orderly Shutdown, Shutting Down the System, Orderly Shutdown
SIPs (System-integrated products)
defined, Glossary
installing after installation or upgrade, Installing and Configuring Layered PProducts (New Installations, Some Upgrades)
Secure Delivery, Using the Install or Upgrade Layered Products Option (3), Installing and Configuring Layered Products (New Installations, Some Upgrades)
differences between OpenVMS Alpha and OpenVMS I64, Differences Between OpenVMS I64 and Alpha Installations
during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
during upgrade, Secure Delivery Validation
new feature, New with OpenVMS Version 8.3
Site-specific command procedures
restored during upgrade, Examining Your Command Procedures (Upgrades Only)
Source drive, Key Terms, Mounting Devices
defined, Key Terms
SSL for OpenVMS
configuring, Configuring SSL for OpenVMS
defined, Glossary
installing, Installing OpenVMS Using Option 1 of the Operating System Menu
installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
new feature, New with OpenVMS Version 8.3
upgrading, Upgrading Windowing, Networking, and Related Products
Standalone Backup, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
Startup command procedure
booting without, Booting Without Startup and Login Procedures
errors preventing login, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
Swap file
checking size, System File Sizes
modifying size, Running AUTOGEN to Tune the System
SWAPFILES.COM procedure
executing to change system file sizes, System File Sizes
SYS$BATCH queue
creating, Setting Up the Queue Manager and Default Queues
SYS$EFI.SYS file
and writing a boot block, Writing a New Boot Block
saving files on before upgrade, Saving Files Added or Modified in the SYS$EFI.SYS Boot Partition (OpenVMS I64 Upgrades from Version 8.2 Only)
SYS$PRINT queue
creating, Setting Up the Queue Manager and Default Queues
SYS$UPDATE.STABACKIT.COM procedure, Alternative Backup and  Restore Procedure (Minimum OpenVMS Environment)
SYS$WELCOME
defining, Creating a System-Specific Login Welcome Message (Optional)
SYSBOOT.EXE, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
commands, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
SYSGEN
ALLOCLASS parameter
for shadow sets, Set System Parameters for Volume Shadowing (New Installations Only; Optional)
setting during installation, OpenVMS Cluster Information You Need, Joining an OpenVMS Cluster
commands for conversational boot, Performing a Conversational (Interactive) Boot, Performing a Conversational (Interactive) Boot
SYSTARTUP_VMS.COM procedure
editing to control DECnet Phase IV, Configuring DECnet
for starting network software at boot, Configuring DECnet
updating to start layered products and print queues, Updating SYSTARTUP_VMS.COM to Start Layered Products and Print Queues
System
customizing, Customizing the System (New Installations, Some Upgrades)
files
adding, Adding and Removing Operating System Files (Optional)
removing, Adding and Removing Operating System Files (Optional)
hang, Detecting and Responding to System Problems, Detecting and Responding to System Problems
libraries
compressing and decompressing, Running AUTOGEN
expanding, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
parameters
booting with default, Booting with Default System Parameters, Booting with Default System Parameters
for volume shadowing, Set System Parameters for Volume Shadowing (New Installations Only; Optional)
incorrect values prevent boot, Booting with Default System Parameters, Booting with Default System Parameters
modifying after installation or upgrade, k Modifying System Parameters
modifying after upgrade, Modifying System Parameters After an Upgrade
modifying before upgrade, Verifying System Parameters
verifying, Verifying System Parameters
problems
troubleshooting, If the System Does Not Boot, Detecting and Responding to System Problems, If the System Does Not Boot, Detecting and Responding to System Problems
shutting down before upgrade, Finishing Preupgrade Tasks
startup in an emergency, Booting in an Emergency, Emergency Booting
with default system parameters, Booting with Default System Parameters, Booting with Default System Parameters
without startup and login procedures, Booting Without Startup and Login Procedures, Booting Without Startup and Login Procedures
without the UAF, Booting Without the User Authorization File, Booting Without a User Authorization File
SYSTEM account
forgotten password, Logging In from a Character-Cell Terminal
logging in, Logging In to the SYSTEM Account
setting password, Installing OpenVMS Using Option 1 of the Operating System Menu
System disk
adding boot entry to EFI Boot Manager menu, Installing OpenVMS Using Option 1 of the Operating System Menu, Choosing Whether to Allow the Procedure to Create and Validate Boot Options (I64 only), Upgrade Creates and Validates Boot Options (I64 Only), Setting Boot Options for Your System Disk
adding system files, Adding and Removing Operating System Files (Optional)
analyzing and repairing, Examining the System Disk
backing up, Backing Up and Restoring the System Disk
after an installation, Backing Up the Customized System Disk and Initiating Systematic Backups
after installation or upgrade, Backing Up Your System Disk
alternate disk for, Alternative Backup and Restore Procedure (Minimum OpenVMS Environment)
before an $ upgrade, Backing Up the System Disk
from OpenVMS main menu, Using the Operating System Menu
boot options, Setting Boot Options for Your System Disk
booting, Booting the New OpenVMS System Disk, Booting Manually from the System Disk, Booting Manually from the Local System Disk
after installation, Rebooting after AUTOGEN
after transferring required save set, Specifying the Default Boot Device on Alpha Systems
checking amount of free space on, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
creating, Installing OpenVMS Using Option 1 of the Operating System Menu
defined, Key Terms, Glossary
initializing, Installing OpenVMS Using Option 1 of the Operating System Menu, Choosing INITIALIZE or PRESERVE
alternative methods, INITIALIZE Option, Alternative Ways to Initialize the System Disk, Alternative Method of Initialization
preparing an alternate for backup, Preparing an Alternate System Disk
preparing for upgrade, Preparing the System Disk
preserving, PRESERVE Option, Installing OpenVMS Using Option 1 of the Operating System Menu, Choosing INITIALIZE or PRESERVE
removing system files, Adding and Removing Operating System Files (Optional)
restoring, Restoring the System Disk
restoring files on, Using the Operating System Menu
space needed
for upgrade, Checking the Size of the System Disk
to decompress libraries, Expanding the System Libraries (Optional; OpenVMS Alpha Only)
specifying
during installation, Installing OpenVMS Using Option 1 of the Operating System Menu
during upgrade, Specifying the Target Disk
unique volume label requirement, Suggested Procedures
upgrading, Shadowing Environment
System Dump Analyzer
(see SDA)
System event log (SEL), Booting Operations
System Generation utility
(see SYSGEN)
System-integrated products
(see SIPs (System-integrated products), Layered products)
SYSTEST account
creating after installation or upgrade, Creating Accounts (New Installations, Some Upgrades)
SYSUAFALT.DAT file, Booting Without the User Authorization File, Booting Without a User Authorization File

T

Target disk
using backup copy for, Backing Up the System Disk
Target drive, Mounting Devices
defined, Key Terms
TCP/IP
third-party
installing, Installing and Configuring Third-Party Networking Software
OpenVMS Management Station, Running Third-Party TCP/IP Stacks
TCP/IP Services for OpenVMS
configuring, Configuring HP TCP/IP Services for OpenVMS
defined, Glossary
installing, Installing OpenVMS Using Option 1 of the Operating System Menu
installing or upgrading, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1)
upgrade
remove older versions prior to, Software That Must Be Manually Removed
upgrading, Upgrading Windowing, Networking, and Related Products
TDC
(see Performance Data Collector base software (TDC_RT), Performance Data Collector (TDC))
TDC_RT
(see Performance Data Collector base software (TDC_RT))
TDF
setting during an installation, Installing OpenVMS Using Option 1 of the Operating System Menu
Temporary Instant Capacity (TiCAP)
defined, Glossary
requirements, Using the Install, Upgrade, or Reconfigure OpenVMS Option (1), Installing OpenVMS Using Option 1 of the Operating System Menu, Upgrading Windowing, Networking, and Related Products
Time differential factor
(see TDF)
Time zones
setting during an installation, Installing OpenVMS Using Option 1 of the Operating System Menu
updating during an upgrade, Updating Time Zone Information
Timeout
EFI boot option, Setting EFI Boot Option Countdown Timer (Timeout)
Troubleshooting
InfoServer boot problems, Troubleshooting InfoServer Boot Problems
system problems, If the System Does Not Boot, If the System Does Not Boot
Tuning operating system, Running AUTOGEN to Tune the System
TURBOchannel
booting
with alternate adapter, Booting over the Network with an Alternate TURBOchannel Adapter
with PMAD adapter, Booting over the Network with an Alternate TURBOchannel Adapter
with PMAZB adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter
with PMAZC adapter, Booting with a PMAZB or PMAZC TURBOchannel Adapter

U

UAFALTERNATE logical name, Booting Without the User Authorization File, Booting Without a User Authorization File
UETP (User Environment Test Package), Testing the System with UETP (Optional)
defined, Glossary
Uninstall
OpenVMS operating system, Removing the OpenVMS Operating System
recovery data for, Checking for Recovery Data
Upgrade
(see also Preupgrade tasks, Postupgrade tasks)
, After Installing or Upgrading the OpenVMS Operating System
(see also Preupgrade tasks, Postupgrade tasks)
booting
operating system kit, Booting the Operating System Media
cautions and restrictions, Notes, Cautions, and Restrictions
checklist, Upgrade Tasks
concurrent (OpenVMS Cluster), Concurrent Upgrade
DECram, Remove Older Versions of DECram for OpenVMS (Alpha Only)
disk space requirement, Checking the Size of the System Disk
effect
on command procedures, Examining Your Command Procedures (Upgrades Only)
on layered products, Licenses and Layered Products
on MODPARAMS.DAT file, Modifying System Parameters After an Upgrade
OpenVMS Cluster
adding a new CPU, Adding a New System to an OpenVMS Cluster
preliminary tasks, Preupgrade Tasks for OpenVMS Cluster Environments
preparing for, Types of Upgrades
required operating system version, Notes and Restrictions
PCSI, Using the Operating System Menu
preparation checklist, Preupgrade Tasks
recovery data, Checking for Recovery Data
rolling (OpenVMS Cluster), Rolling Upgrade
shadowed disks, Shadowing Environment
stages of, Upgrade Tasks
time zones, Updating Time Zone Information
Upgrade paths, Upgrade Paths
User accounts
creating after installation or upgrade, Creating Accounts (New Installations, Some Upgrades)
User authorization file
(see also UAF)
, Booting Without the User Authorization File (see UAF)
(see also UAF)
User Environment Test Package
(see UETP)