HP OpenVMS Systems Documentation
HP DECwindows Motif for OpenVMS
The file DXMDEFAULTS.DAT allows you to control how many dynamic color cells are allocated and what resources are affected. This file contains resource specifications like the following:
*background: DXmDynamicWindowBackground *foreground: DXmDynamicWindowForeground *topShadowColor: DXmDynamicWindowTopShadow
When the customizer is started, the file DXMDEFAULTS.DAT is written to a property on the root window. Any application that is subsequently run and that uses the correct version of Xt merges these resources with its normal resource database. Resource specifications in this file take precedence over specifications with equivalent resource names in other resource default files.
The resource values within the file DXMDEFAULTS.DAT have a special format. For each unique color value in this file that begins with the string "DXmDynamic", a color button is created in the color customizer. If the string "Shadow" is encountered in a name, the color button is placed in the shadow button box rather than the normal color button box. If a color value string ends with the suffix "Background", it is linked to any color buttons with identical prefixes and suffixes of "TopShadow", "BottomShadow", or "SelectColor" for purposes of automatic shadowing. If a color value named "DXmDynamicScreenBackground" is encountered, the color cell allocated is used by the customizer to set the root window background color.
You can edit the file DXMDEFAULTS.DAT and define resources to use the same color cells. You can have separate dynamic color cells, for scroll bar widgets or for your DECwindows Mail application, for example, by adding the following lines to the file DXMDEFAULTS.DAT:
Mail*background: DXmDynamicMyMailBackground Mail*foreground: DXmDynamicMyMailForeground Mail*topShadowColor: DXmDynamicMyMailTopShadow Mail*bottomShadowColor: DXmDynamicMyMailBottomShadow
Adding the previous lines to the file DXMDEFAULTS.DAT and restarting the customizer causes four new color cells to be allocated and four new color buttons to be added to the customizer interface. These buttons are assigned default color values (usually black or white) for each palette. These defaults can then be modified for each palette through the customizer interface.
The text of the DXMDEFAULTS.DAT file is read and parsed by the color customizer. The parsing algorithm does not allow comments, incorrect spacing, or incorrect resource specifications. If this file or the CUSTOM.DAT resource file become corrupt, the customizer cannot start correctly. To resolve the problem, copy the versions of CUSTOM.DAT and DXMDEFAULTS.DAT from the DECW$EXAMPLES directory into your login directory.
To change the colors of DECterm windows, copy the DECterm resource specifications from the file DXMDEFAULTS.DAT and add them to the DECterm resource defaults file DECW$USER_DEFAULTS:DECW$TERMINAL_DEFAULT.DAT. For example, add the following lines to the DECterm resource defaults file:
DECW$TERMINAL.main.terminal.background: DXmDynamicTerminalBackground DECW$TERMINAL.main.terminal.foreground: DXmDynamicTerminalForeground
This allows the DECterm window colors to be customized with the color
220.127.116.11 Changing the Default Value of the Automatic Shadowing Toggle Button
The default value of the automatic shadowing toggle button is set using the Custom.autoShadow resource in the CUSTOM.DAT file as follows:
The default value is True.
18.104.22.168 Using the Customizer on Multihead Systems
The color customizer affects only applications started on the same screen as the customizer. On most multihead systems, you can start a different color customizer for each screen and have a different palette in effect on each screen. On multihead systems using XINERAMA, a single instance of the color customizer affects all applications, since the screens function as a single logical screen.
The color customizer can be configured so that it is invoked once and affects all applications regardless of where they are started. This mode is invoked by modifying the Custom.multiScreen resource in the CUSTOM.DAT file as follows:
The default value is False.
22.214.171.124 Using the XSETROOT_CUST.EXE Demonstration Program
The XSETROOT_CUST.EXE demonstration program, created during the customizer build, is a modified version of the X utility xsetroot that is used to set a bitmap on the root window. The XSETROOT_CUST.EXE program uses DXmDynamicScreenBackground and DXmDynamicScreenForeground as the background and foreground colors of the specified bitmap. If your DXMDEFAULTS.DAT file contains entries for these two dynamic colors, then use the customizer to dynamically modify the colors of your bitmap.
$ XSETROOT_CUST :== "$SYS$LOGIN:XSETROOT_CUST.EXE" $ XSETROOT_CUST -BITMAP your_xbm_file.XBM
The drag-and-drop feature lets you move or copy screen objects. This feature is provided primarily for programmers who choose to incorporate drag-and-drop into their applications. For example, you can move text from a text entry area and paste it elsewhere.
All DECwindows Motif applications except Notepad support the drag-and-drop feature. DECwindows Mail supports the drag-and-drop feature in all windows except the main message area, where DECwindows Mail has its own drag-and-drop; you can use MB2 to move messages around with the SVN interface.
To drag and drop text into a new location:
Most DECwindows Motif applications allow you to tear off pull-down and popup menus. Tear-off menus let you keep frequently used menus displayed without repeatedly pulling them down or popping them up.
To tear off a menu:
To close a tear-off menu:
This section describes new features related to the New Desktop
2.2.1 Updated Welcome Message
The welcome message in the Login Screen now displays a host name
regardless of the transport. If the DECnet transport is configured, the
DECnet host name is displayed. If the TCP/IP transport is configured,
the TCP/IP host name is displayed. If neither transport is configured,
a default message of "Welcome to OpenVMS" is displayed.
2.2.2 Setting the File Manager Refresh Rate
You can now specify that the File Manager periodically update its view
on the New Desktop by adjusting the Dtfile.rereadTime setting
in the DTFILE.DAT resource file. The value of this setting represents
the seconds elapsed between checking for changes in the viewed
directories. Note that this setting does not work when viewing search
2.2.3 Selecting Screens on Application Launch
You can graphically select the screen on which a new application is displayed when launched from either the Front Panel, the File Manager, or the Application Manager. By default, the new application appears on the current screen (that is, the screen containing the mouse pointer). The feature allows you to drop an application icon from the File Manager or Application Manager onto one of the numbered screen controls of the Set Default Screen window. This starts the application on the selected screen without changing the current screen.
The Set Default Screen window is activated by selecting the "Set
Default Screen" application in the Application Manager's Desktop
Tools folder. You can start a separate instance of the Set Default
Screen window on each screen. The highlighting of the default screen is
synchronized across all instances of the Set Default Screen window.
2.2.4 Front Panel Icons Support MB3 Operations
The New Desktop Front Panel supports mouse button 3 (MB3) operations. When the cursor is placed over a Front Panel icon and you press MB3, a subpanel or menu appears. The menu items are as follows:
If the third item is "Delete Subpanel", this change is difficult to reverse without reinstalling the kit.
This section describes new features related to the traditional
DECwindows desktop environment.
2.3.1 Resource Added for DECwindows XUI Applications
The resource Mwm*useDECMode has been added to allow previous
versions of DECwindows XUI applications to behave correctly with the
Motif Window Manager. In particular, this resource is used to control
focus, window placement, multiline icons, and the window's initial
state (normal or minimized).
The following sections describe new features related to specific
DECwindows Motif applications.
2.4.1 CDA Viewer
This section describes features related to the Compound Document
Architecture (CDA) Viewer application.
126.96.36.199 Using the CDA Viewer to View Asian-Language Text
You can use the CDA Viewer in two ways to view text files that contain Asian characters:
Refer to the DECwindows Motif for OpenVMS Applications Guide for information about using the CDA Viewer.
188.8.131.52.1 Specifying an Options File
Specify an options file by including a one-line entry in the file in the following format:
TEXT TEXT_ENCODING text_encoding_value
Table 2-1 shows the languages, codesets, and text-encoding values.
|Language||Codeset||Text Encoding Value|
|Japanese||Super DEC Kanji||SDECKANJI|
|Traditional Chinese||DEC Hanyu||DEC_HANYU|
|Simplified Chinese||DEC Hanzi||DEC_HANZI|
The following table shows examples of one-line entries.
|Options File||One-Line Entry|
|HANYU.CDA$OPTIONS||TEXT TEXT_ENCODING DEC_HANYU|
|HANZI.CDA$OPTIONS||TEXT TEXT_ENCODING DEC_HANZI|
|HANGUL.CDA$OPTIONS||TEXT TEXT_ENCODING DEC_HANGUL|
To view the EXAMPLES_CUSTOMERS.TXT file that contains Japanese text in DEC Kanji, use your editor to create an options file called KANJI.CDA$OPTIONS. Add the following one-line entry to the file:
TEXT TEXT_ENCODING DEC_KANJI
When you access the file through the Options File dialog box with the
CDA Viewer, the EXAMPLES_CUSTOMERS.TXT file is viewable in the DEC
Kanji codeset (Japanese language).
184.108.40.206.2 Defining Logical Names
The second option to enable viewing files in Asian languages is to specify the text file and encoding value by defining two logical names:
Table 2-2 shows the logical names and associated encoding values.
You can define the logical names on the DCL command line or in your LOGIN.COM file. For example:
$ DEFINE DDIF$READ_TEXT_GL LATIN1 $ DEFINE DDIF$READ_TEXT_GR KANJI
Note that this example defines the text encoding for DEC Kanji (see
220.127.116.11 Converting Files That Contain Asian-Language Characters
You can convert an Asian-language text file to another format by specifying an options file or by defining the logical names DDIF$READ_TEXT_GL and DDIF$READ_TEXT_GR as discussed in Section 18.104.22.168.1 and Section 22.214.171.124.2.
The format for converting a document from TEXT to another format is as follows:
$ CONVERT/DOCUMENT/OPTION=language.CDA$OPTIONS filename.TXT/FORMAT=TEXT - _$ filename.output_extension/FORMAT=output_format
For example, to convert a traditional Chinese language text file to a DDIF file, enter the following command line:
$ CONVERT/DOCUMENT/OPTION=HANYU.CDA$OPTIONS - _$ GUIDELINES_PERSONNEL.TXT/FORMAT=TEXT GUIDELINES_PERSONNEL.DDIF
Note that this command line does not include the /FORMAT=DDIF qualifier; DDIF is the default.
The output file, GUIDELINES_PERSONNEL.DDIF, contains language data.
You can also create Asian language PostScript files from a DDIF, DTIF, or text (ASCII) file. For example, to convert a DDIF file to PostScript (.PS) format, enter the following command:
$ CONVERT/DOCUMENT filename.DDIF filename.PS/FORMAT=PS
Convert only DDIF and DTIF files that contain language data to Asian language PostScript format.
When you print an Asian language PostScript file on a PostScript printer, ensure that the required language fonts are available on the printer. Otherwise, the PostScript file defaults to a basic set of fonts. If these fonts do not exist, the PostScript file defaults to Courier fonts. Table 2-3 shows the languages and their associated basic fonts.
|Japanese||Ryumin-Light-EUC-H or Ryumin-Light-Hankaku|
Vertical writing is not supported by the CDA converters. All vertical text is printed horizontally.
As well as supporting a static-table for the fonts supported by the DECfonts Typeface Collection Version 1.2, the CDA Run-Time Services includes support for dynamic font lookup. This enables the CDA Viewer to use new fonts as they are installed on the system.
Dynamic font support is implemented using the WRITE$FONTS.INI file, which you can maintain using the Font utility provided with either DECwrite or DECpresent. If a document contains a font not found in the static tables, the CDA Viewer tries to open the WRITE$FONTS.INI file and search for the font. If the font is not found or if the system does not contain a WRITE$FONTS.INI file, the viewer uses a fallback font.
The WRITE$FONTS logical name references an initialization file used to provide font definitions to the CDA Viewer.
The default location for the WRITE$FONTS.INI file is SYS$LIBRARY, but, if the logical name WRITE$FONTS is defined, the CDA Viewer uses the logical name definition to search for the WRITE$FONTS.INI file.
Full path support is included, so any of the following definitions are valid:
|WRITE$FONTS Logical Name||Resulting File|
The current version of CDA Run-Time Services includes a performance enhancement that decreases the time it takes to display the first page of a CDA document. Other applications that use the CDA Viewer to view documents (for example, DECwindows Mail) also benefit from this enhancement.
The CDA Viewer enables this performance enhancement feature by default. You can disable the feature as follows:
$ DEFINE CDA_QUICK_FIRST_PAGE FALSE
The CDA Viewer might not display some documents correctly when this
feature is enabled. If you encounter such a problem, disable the
feature and invoke the CDA Viewer again.
126.96.36.199 Pack and Unpack Applications
CDA Run-Time Services includes two standalone applications that can be used for transferring CDA documents across a network. The CDA Pack application packages a CDA document along with all of its externally referenced files into a single file that can be copied between systems or mailed to other users. The CDA Unpack application reads a file that is packaged by the CDA Pack application and creates a copy of the original document file and all its externally referenced files.
These applications allow you to copy CDA documents between systems without copying externally referenced files separately or correcting external file reference information after copying documents.
To use these applications, add the following lines to your LOGIN.COM file (or add the lines to the SYS$MANAGER:SYLOGIN.COM file):
$ PACK == "$SYS$SYSTEM:CDA$PACK.EXE" $ UNPACK == "$SYS$SYSTEM:CDA$UNPACK.EXE"