HP OpenVMS Systems Documentation

Content starts here

Compaq TCP/IP Services for OpenVMS

Begin Index

Contents (summary)
Preface Preface
Part 1 Connecting to the Network
Chapter 1 Managing TCP/IP Services
Chapter 2 Configuring Interfaces
Chapter 3 Configuring Serial Lines
Chapter 4 Configuring Routing
Part 2 BIND
Chapter 5 Configuring and Managing BIND
Chapter 6 Using DNS to Balance Work Load
Part 3 Configuring Services
Chapter 7 Configuring the DHCP Server
Chapter 8 Configuring the DHCP Client
Chapter 9 Configuring BOOTP
Chapter 10 Configuring TFTP
Chapter 11 Configuring the Portmapper
Chapter 12 Configuring and Managing NTP
Chapter 13 Configuring SNMP
Part 4 Configuring Network Applications
Chapter 14 Configuring and Managing TELNET
Chapter 15 Configuring and Managing FTP
Chapter 16 Remote (R) Commands
Chapter 17 Configuring and Managing SMTP
Chapter 18 Configuring and Managing the POP Server
Chapter 19 Configuring XDMCP-Compatible X Displays
Part 5 Network File Services
Chapter 20 NFS Server
Chapter 21 NFS Client
Part 6 Configuring Printing Services
Chapter 22 Setting Up and Managing the LPR/LPD Print Service
Chapter 23 Setting Up and Managing TELNETSYM
Chapter 24 Setting Up PC-NFS
Part 7 Appendixes
Appendix A Gateway Routing Daemon (GATED) Configuration Reference
Appendix B EBCDIC/DMCS Translation Tables
Appendix C How NFS Converts File Names
Appendix D Acronyms


Preface Preface
Part 1
Part 1 Connecting to the Network
Chapter 1
1 Managing TCP/IP Services
     1.1     Getting Started
         1.1.1         Logical Names
         1.1.2         Modifying Your Configuration
         1.1.3         Saving Changes
         1.1.4         Starting and Stopping the Software
     1.2     Enabling PATHWORKS/Advanced Server and DECnet-over-TCP/IP Support
         1.2.1         Starting and Stopping the PWIP Driver
     1.3     Setting Up User Accounts and Proxy Identities
     1.4     Configuring a TCP/IP Cluster
         1.4.1         Setting Up an ARP-Based Cluster
     1.5     Auxiliary Server
         1.5.1         How the Auxiliary Server Works
                Rejecting Client Requests
                Configuring the Auxiliary Server
     1.6     Enabling Services
         1.6.1         Setting Up Event Logging
Chapter 2
2 Configuring Interfaces
     2.1     Key Concepts
     2.2     Configuring Network Controllers
     2.3     Configuring Network Interfaces
         2.3.1         Specifying the Interface
         2.3.2         Specifying the Network Mask
         2.3.3         Specifying Additional IP Addresses
Chapter 3
3 Configuring Serial Lines
     3.1     Key Concepts
         3.1.1         PPP and SLIP
         3.1.2         Assigning an IP Address to Your PPP or SLIP Interface
         3.1.3         Serial Line Internet Protocol
         3.1.4         Point-to-Point Protocol
     3.2     Setting Up a PPP Interface (Alpha Only)
         3.2.1         Setting Up Your Host for PPP Connections
                Installing the Terminal Driver
                Configuring the Modem
                Setting Up an Asynchronous Port
                Configuring a PPP Interface
                Enabling IP Forwarding (Dialup Provider Only)
                Initiating a PPP Connection
         3.2.2         Removing the PPP Configuration
     3.3     Setting Up a SLIP Interface
         3.3.1         Setting Up Hard-Wired SLIP Lines
         3.3.2         Setting Up SLIP Dialup Lines
         3.3.3         Setting Up Your Host as a SLIP Dialup Provider
         3.3.4         Connecting a Host to the LAN
         3.3.5         Setting Up a SLIP Gateway with Proxy ARP
         3.3.6         Shutting Down SLIP
     3.4     Solving Serial Line Problems
         3.4.1         Solving PPP Problems
Chapter 4
4 Configuring Routing
     4.1     Key Concepts
         4.1.1         Static Routing
         4.1.2         Dynamic Routing
                Routing Daemon (ROUTED)
                Gateway Routing Daemon (GATED)
     4.2     Configuring Static Routes
         4.2.1         Creating a Default Route
         4.2.2         Manually Defining Static Routes
         4.2.3         Displaying Manually Defined Routes
     4.3     Enabling and Disabling Dynamic Routing
     4.4     Configuring GATED
         4.4.1         Datagram Reassembly Time
         4.4.2         Enabling Forwarding
         4.4.3         Extending Routing
         4.4.4         Interface Routes
         4.4.5         Manually Configuring a Hardware Address
Part 2
Part 2 BIND
Chapter 5
5 Configuring and Managing BIND
     5.1     Key Concepts
         5.1.1         How the Resolver and Name Server Work Together
         5.1.2         Common BIND Configurations
                Master Servers
                Slave Servers
                Caching-Only Servers
                Forwarder Servers
     5.2     Migrating to BIND 8.1
         5.2.1         Navigating Two Different BIND Environments
     5.3     Configuring the BIND Server (BIND 8.1)
         5.3.1         BIND Configuration Logging Statement
                Channel Phrase
                Category Phrase
         5.3.2         BIND Configuration Options Statement
                Path Names
                Boolean Options
                Name Checking
                Access Control
                Query Address
                Zone Transfers
                Periodic Task Intervals
         5.3.3         BIND Configuration Server Statement
                Limiting the Number of Transfers
                Efficient Zone Transfers
         5.3.4         BIND Configuration Zone Statement
         5.3.5         Address Match Lists and ACLs
         5.3.6         Dynamic Updates
                Preserving the Zone File
                Manually Creating Updates
         5.3.7         Configuring Cluster Failover and Redundancy
                Changing the BIND Database
     5.4     Populating the BIND Server Databases
         5.4.1         Using Existing Databases
         5.4.2         Manually Editing Zone Files
         5.4.3         Saving Backup Copies of Zone Data
         5.4.4         Sample Database Files
                Local Loopback: Forward and Reverse Translation Files
                Hint File
                Forward Translation File
                Reverse Translation File
     5.5     Examining Name Server Statistics
     5.6     Configuring BIND with SET CONFIGURATION Commands
         5.6.1         Setting Up a Master Name Server
         5.6.2         Setting Up a Secondary (Slave) Name Server
         5.6.3         Setting Up a Cache-Only Server
         5.6.4         Setting Up a Forwarder Name Server
     5.7     Configuring the BIND Resolver
         5.7.1         Changing the Default Configuration
         5.7.2         Examples
         5.7.3         Resolver Default Search Behavior
         5.7.4         Resolver Search Behavior in Earlier Releases
         5.7.5         Setting the Resolver's Domain Search List
     5.8     Using NSLOOKUP to Query a Name Server
         5.8.1         Invoking NSLOOKUP
         5.8.2         Obtaining Help
         5.8.3         NSLOOKUP Commands
         5.8.4         Default Option Values
         5.8.5         Query Types
                A Query Type
                PTR Query Type
                MX Query Type
                SOA Query Type
                NS Query Type
         5.8.6         Changing the Default Server
         5.8.7         Listing Domain Information
     5.9     Solving Bind Server Problems
         5.9.1         Server Not Responding
         5.9.2         Serial Number Mismatch

Previous Next Contents Index